Control Unit
Control Panel: Membrane touch button Cabinet: Stainless Steel (304) designed to IP53
(BSEN 60529: 1992)
Cabinet
dimensions: 245mm x 475mm x 725mm (9.6” x 18.7” x 28.5”)
Weight: 36kg (79lbs)
Character Control • Auto repeat • Character width and
• Auto invert/reverse height adjustment • User defined clock format • Print delay
• Sequential/batch numbering • Product counter • Inverse reverse and • Barcodes bold characters • Message repeat
Data Input Options
• Serial RS232 • Ethernet, RJ45 Connector • Rate: 110-38.4k Baud, software configurable
Ink System
Viscosity control: Automatic
Ink bleed control: Automatic on start up
Ink and make-up refill: 825ml (.87qt) cartridge
automatically metered
Peltier: Optional
Print head
Dimensions: 240mm x 41mm x 47mm (9.45” x 1.61” x 1.85”)
Conduit length: 3m ( 11’8) or 6m (23’6)
Positive air: Optional internal supply
Airdryer: Internal compressor or factory air option Environment
Temperature range: 5 – 45°C (40 – 112°F) operating
Humidity: 10 – 90% (non-condensing)
Electrical requirements: Single phase, fully auto-ranging
90 – 132V/ 180 – 264V, 50/60Hz 200VA
Standard Connections Product detector: 12V 100mA for photocell or proximity detector. IP68 6 way socket
Shaft encoder input: Open collector or TTL encoder 12V via IP68 6 way socket
Options Alarm beacon connector: IP68 7 way socket
Auxiliary alarms connector: IP68 9 way plug
User port connector: IP68 25 way socket
Accessories Full range of photocells, stands and bracketry